2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Latest products
Advertising why cutting machine to use?
by：ZORON Machinery
2021-01-29
Now advertising material industry needs more and more, in addition to acrylic, galvanized sheet, some commonly used materials such as wood, iron, carbon steel, stainless steel, titanium plate, etc. Also used more and more, it also let the increasing need of cutting machine, so advertising why use cutting machine?
1, high cutting precision. Cutter positioning accuracy is 0. 5 mm, repeat positioning accuracy is 0. 03mm。
2, beam focusing into very small points of light, the focus of big power, material quickly heated until the gasification, evaporation form holes, as the beam linear movement, to form holes for very narrow kerf width, width of incision is commonly 0. 1 - 0. 2 mm.
3, no burr, cutting, surface roughness of general control in the Ra6. 5 or less. The cutting speed can be up to 10 m/min, positioning speed can be up to 30 m/min a lot faster than the speed of the cutting.
4, non-contact cutting, trimming affected by heat is small, basic will not occur the thermal deformation of workpiece, completely avoid materials for punching and shearing edge collapse, generally do not need to undertake secondary processing kerf width. Cutting head not with material surface contact, so will not scratch the surface.
5, processing flexibility, arbitrary shaped graphics processing, can also be cutting steel tubes and other a variety of different materials. Does not need to mold processing, no mould cost, need not frequent repair repair mould, mould replacement time saving, thereby saving the mould processing cost, reduce the production cost, especially for large products processing production.
6, cutting machine adopts computer programming, can put the products of different shape cutting, can improve the utilization rate of material. Processing waste less, low noise decibel, clean, safe environmental protection, greatly improve the working environment.
1, high cutting precision. Cutter positioning accuracy is 0. 5 mm, repeat positioning accuracy is 0. 03mm。
2, beam focusing into very small points of light, the focus of big power, material quickly heated until the gasification, evaporation form holes, as the beam linear movement, to form holes for very narrow kerf width, width of incision is commonly 0. 1 - 0. 2 mm.
3, no burr, cutting, surface roughness of general control in the Ra6. 5 or less. The cutting speed can be up to 10 m/min, positioning speed can be up to 30 m/min a lot faster than the speed of the cutting.
4, non-contact cutting, trimming affected by heat is small, basic will not occur the thermal deformation of workpiece, completely avoid materials for punching and shearing edge collapse, generally do not need to undertake secondary processing kerf width. Cutting head not with material surface contact, so will not scratch the surface.
5, processing flexibility, arbitrary shaped graphics processing, can also be cutting steel tubes and other a variety of different materials. Does not need to mold processing, no mould cost, need not frequent repair repair mould, mould replacement time saving, thereby saving the mould processing cost, reduce the production cost, especially for large products processing production.
6, cutting machine adopts computer programming, can put the products of different shape cutting, can improve the utilization rate of material. Processing waste less, low noise decibel, clean, safe environmental protection, greatly improve the working environment.
Custom message
