Analyses the four factors influencing cutting precision of the cutting machine

Cutting accuracy is essential to determine cutting machine quality. This paper will analyze four factors affected the accuracy of cutting machine for cutting.

a, generator of agglomerate size: if smaller light spot after gathered, the cutting precision is higher, if after cutting the gap is smaller. Shows high precision cutting machine, good quality. But the beam for conical, so cut the gap is conical. Under this condition, the greater the thickness of the workpiece, the lower the accuracy will also, therefore the greater the kerf width.

2, the precision of the workbench: if high precision of cutting machine workbench, is cutting accuracy is higher. So the precision of the workbench is also a important factor to measure accuracy of generator.

3, beam condensed into a cone: cutting machine, cutting the light beam is tapered down, at this time if the thickness of cutting the workpiece is larger, the precision of cutting will fall and cut out the gap will be larger.

4, cutting material is different, also affect the precision of the cutting machine. In the same situation, cutting machine for cutting stainless steel and aluminum cutting its precision will be different, the cutting of stainless steel precision will be a little high, and the edge will be smooth.

in addition, when choosing cutting machine in addition to pay attention to these points, but also good after-sale service.