Cooling water machine for cutting machine installation location requirements

Cold water machine cutting machine must be reasonable arrange placement can play its normal role, don't look down upon this ordinary action, cold water machine can't play a full role will greatly affect the cutting machine production efficiency. Let's talk about the cutting machine for cold water machine installation location and position requirements:



1, cutting machine, cold water machine is suitable for installation in indoor, environment temperature 5 ℃ to 35 ℃, relative humidity less than 80% ( No condensation) ；

2, cold water machine installed at the levels of solid surface, should as far as possible is close to the cooling body, away from the heat source should have at least 1. 4 meters;

3, in order to prevent the voltage drop, cold water machine should be as close to the power board, we do not recommend using power extension, guarantee the correct power export and ground connection, and to ensure that the voltage and frequency with cold water machine the back indicated on the label match;

4 machine, cutting machine, cold water cooling fan discharge the rated heat is closed to the rated refrigerating capacity of 1. 4 times the left and right sides, so the cold water machine can't rely on a wall all around, hot air discharge side set aside 0. More than 8 m spacing, indoor to fully ventilated.