Cutter construction should pay attention to? The life time!

Have a new type of cutting machine, in recent years has been widely applied in cutting operation, the device is the 'cutter' popular in recent years, as a popular in recent years, cutting machine, cutting machine used in recent years both cutting efficiency and feelings are far more than the traditional cutting machine, as the saying goes, safety work is very important, let's learn about the cutter, what should you pay attention to construction. Cutter construction items: 1, banning the use of oil tools and gloves contact oxygen tank and its accessories, valves, and rubber hoses. Ban with easy to produce sparks tools to dropoff or acetylene valve. 2, the operator shall accept special security technology through the training, and acquire the qualification of special cutting machine operation, can the independent operation. 3, the operation personnel should strictly abide by the general welding and manual welding, Cut) Work safety operation procedures, oxygen tanks and all kinds of industrial rubber hose, cutting machine cutting cylinders safety procedures, use and welding ( Cut) Torch safety operation procedures. 4, before starting, check whether there is sundry, on both sides of machine and orbiting around within 10 meters don't allow any flammable items. The normal work of the air, water and power supply. Check machine related grounding is loose, the cable joint outlet are in good condition. Check gas cylinder and rubber hose joints, valves and fastener tighten, whether can not have loose, damage or leakage phenomenon. 5, after the machine start, the body and limbs shall not contact the machine's moving parts, so as to avoid injury. Please turn off machine power supply when maintenance equipment. 6 cylinders, or when the mother tube is frozen, the prohibition of roasted with fire or with tools tap on a frozen block. Oxygen valve or piping can be dissolved with 40 warm water. Gas cylinders should avoid direct sunlight. The above is the construction type cutting machine items, don't know the screen in front of you is there any help? With the widely application of the cutting machine in recent years, we also should pay attention to when using cutting machine cutting machine maintenance, so as to prolong the service life of cutter, reduce the use cost cutting machine.