2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Latest products
Cutting and maintenance tips, learn the maintenance is king
by：ZORON Machinery
2021-01-29
Cutting machine in manufacturing industry has a pivotal position, its service life is directly affect the enterprise production speed.
In the daily machinery and equipment in use process, should pay attention to what aspects of maintenance skill, to facilitate to improve the efficiency of the cutting machine?
If you still don't know friends let small make up to explain to you:
1) Regularly check the steel belt, must ensure tension. Otherwise in run out of the question, probably will hurt people, serious still can cause death. Steel with seemingly little things, out of the question is a bit serious.
2) Every six months check rail straightness and verticality of the machine, found abnormal timely maintenance and debugging. Didn't do this, may be cut out of the effect is not good, the error will increase, affect the cutting quality. This is a top priority, have to do.
3) Once a week for the vacuum suction off the dust and dirt inside the machine, all electrical cabinets should be protected from dust.
4) The guide should often clean, remove dust and other sundry, ensure the normal order of the equipment rack always wipe, add lubricating oil, ensure lubricating and no clutter. Guide to regular cleaning and lubricating oil, and the motor is always clean and grease, machine in March will be better and more accurate cutting, cutting out the product quality will be improved.
5) Double the focal length of cutting head is cutting machine on perishable goods, use for a long time, cause the damage of cutting head.
cutters need to regularly check the maintenance. If there is any deformation or other form, by this time you should know the cutting head is damaged, to be replaced. Don't be replaced will influence the cutting quality, increase cost, some products may be secondary processing, reduce the production efficiency. Cutting head looking for ZuoLong machinery production, replenish onr's stock, I will carefully check, in order to avoid problems when the time comes when using.
1) Regularly check the steel belt, must ensure tension. Otherwise in run out of the question, probably will hurt people, serious still can cause death. Steel with seemingly little things, out of the question is a bit serious.
2) Every six months check rail straightness and verticality of the machine, found abnormal timely maintenance and debugging. Didn't do this, may be cut out of the effect is not good, the error will increase, affect the cutting quality. This is a top priority, have to do.
3) Once a week for the vacuum suction off the dust and dirt inside the machine, all electrical cabinets should be protected from dust.
4) The guide should often clean, remove dust and other sundry, ensure the normal order of the equipment rack always wipe, add lubricating oil, ensure lubricating and no clutter. Guide to regular cleaning and lubricating oil, and the motor is always clean and grease, machine in March will be better and more accurate cutting, cutting out the product quality will be improved.
5) Double the focal length of cutting head is cutting machine on perishable goods, use for a long time, cause the damage of cutting head.
cutters need to regularly check the maintenance. If there is any deformation or other form, by this time you should know the cutting head is damaged, to be replaced. Don't be replaced will influence the cutting quality, increase cost, some products may be secondary processing, reduce the production efficiency. Cutting head looking for ZuoLong machinery production, replenish onr's stock, I will carefully check, in order to avoid problems when the time comes when using.
Custom message
