2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Latest products
Cutting machine air compressor maintenance?
by：ZORON Machinery
2021-01-29
Air compressor is part of the cutting machine system.
Say it first, the concept of air compressor is the main body in air supply device, it is the prime mover (
Usually the motor,
Device that can convert the mechanical energy of gas pressure, is the pressure of compressed air generator.
The following is a major part of the it maintenance and maintenance work.
1, the oil filter. To replace a new one every 2000 hours.
2, oil vapor separator. Need to replace a new one every 4000 hours.
3, the relief valve. Check whether the action sensitive every 4000 hours.
4, the oil drain valve. Every 2000 hours to discharge water and dirt.
5, motor maintenance. According to the motor operating instructions for maintenance.
6, pressure valve. Once every 4000 hours cleaning, and check whether the open pressure is normal.
7, compressor lubricants. To check the oil every 1000 hours, enough to replace the new oil every 4000 hours.
8, drive belt. Every 2000 hours to adjust the firmness, abrasion of checking every 4000 hours, according to the wear condition to decide whether need to change.
9, air filter filter. In general every 500 hours to remove dust on the surface of the air filter filter material, check whether need to replace every 2000 hours. Inspection or replacement cycle according to dustiness delay
long or short.
10, the inlet valve seals. Want to work at the cutting machine of the air compressor for every 4000 hours, check the sealing ring, to be replaced when necessary.
in order to make the cutting machine of the air compressor can run normally and reliably, and ensure the service life of the unit, must develop detailed maintenance plan, implement during operation, regular maintenance, regular inspection and maintenance, keep the air compressor unit, clean, no oil, no dirt.
1, the oil filter. To replace a new one every 2000 hours.
2, oil vapor separator. Need to replace a new one every 4000 hours.
3, the relief valve. Check whether the action sensitive every 4000 hours.
4, the oil drain valve. Every 2000 hours to discharge water and dirt.
5, motor maintenance. According to the motor operating instructions for maintenance.
6, pressure valve. Once every 4000 hours cleaning, and check whether the open pressure is normal.
7, compressor lubricants. To check the oil every 1000 hours, enough to replace the new oil every 4000 hours.
8, drive belt. Every 2000 hours to adjust the firmness, abrasion of checking every 4000 hours, according to the wear condition to decide whether need to change.
9, air filter filter. In general every 500 hours to remove dust on the surface of the air filter filter material, check whether need to replace every 2000 hours. Inspection or replacement cycle according to dustiness delay
long or short.
10, the inlet valve seals. Want to work at the cutting machine of the air compressor for every 4000 hours, check the sealing ring, to be replaced when necessary.
in order to make the cutting machine of the air compressor can run normally and reliably, and ensure the service life of the unit, must develop detailed maintenance plan, implement during operation, regular maintenance, regular inspection and maintenance, keep the air compressor unit, clean, no oil, no dirt.
Custom message
