2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Latest products
Cutting machine breakdown is what reason?
by：ZORON Machinery
2021-01-29
Cutting machine is facing most of the work environment is harsh environment.
Through correct method, is a good way to prevent the core component of cutting machine malfunction, can greatly reduce the failure rate of cutting machine.
When use should pay attention to protecting the core part, the core component of cutting machine is very important.
Here, let us find out the reason for the cutting machine fault, the hope can help screen in front of you.
Cutting machine failure reasons: 1.
Ground felt great in the production of machinery manufacturing factory, the physics such as drag and vibration displacement action will not only bring huge noise, but also for
cutter disk, cd-rom and floppy drive caused great damage. In automatic control system of a large number of data exchange, the long time high speed running disk easily affected by vibration is passed on to the disk, resulting in a decline in disk, speaking, reading and writing, head positioning is slow, and even damage of disk. Therefore, reduces the cutting machine environment vibration, which is beneficial to protect the disk. In engineering design, we can make the
cutting machine as far as possible away from the earthquake source field; If the work place can't change, we can also be placed under the industrial control cabinet and cabinet sponge and buffer material, the damage to reduce the vibration. 2. There are a lot of inhalable particles in the air, many factories powder most of the raw materials needed to processing. More dust, in addition, because of the outside air flow, it is easy to collected a lot of sticky dust in the cutter, causes high local temperature in the cutting machine and hardware damage. This usually happens around the cooling fan, such as processor, power supply, hard disk, and graphics. Where the dust accumulation is lighter, in normal production permission, can adopt blowing on a regular basis. For dust, can put strainer mesh cutting machine ventilated place, and regular cleaning. 3. The power supply voltage fluctuation is very big, easy to power outages.
cutter disk, cd-rom and floppy drive caused great damage. In automatic control system of a large number of data exchange, the long time high speed running disk easily affected by vibration is passed on to the disk, resulting in a decline in disk, speaking, reading and writing, head positioning is slow, and even damage of disk. Therefore, reduces the cutting machine environment vibration, which is beneficial to protect the disk. In engineering design, we can make the
cutting machine as far as possible away from the earthquake source field; If the work place can't change, we can also be placed under the industrial control cabinet and cabinet sponge and buffer material, the damage to reduce the vibration. 2. There are a lot of inhalable particles in the air, many factories powder most of the raw materials needed to processing. More dust, in addition, because of the outside air flow, it is easy to collected a lot of sticky dust in the cutter, causes high local temperature in the cutting machine and hardware damage. This usually happens around the cooling fan, such as processor, power supply, hard disk, and graphics. Where the dust accumulation is lighter, in normal production permission, can adopt blowing on a regular basis. For dust, can put strainer mesh cutting machine ventilated place, and regular cleaning. 3. The power supply voltage fluctuation is very big, easy to power outages.
Custom message
