Cutting machine can't cut the materials, and reason

The cutting machine can cut many fine things, but also has a lot of looks is suitable for the material, the cutting machine is not practical cutting machine for cutting ( Although it looks more appropriate) , dongguan ZuoLong mechanical equipment to provide you with the cutting machine can't cut the materials, and reason. Materials for risk factors and results of PVC ( Polyvinyl chloride) / vinyl/leather/synthetic leather release chlorine when cut off! Don't cut the material, because it would destroy the optics, lead to corrosion of metal machine, chlorine release, destroy the motion control system. Thick ( > 1mm) Polycarbonate/Lexan is poorly cut and fade, fire polycarbonate is usually a flat sheet material. The window of the cutting machine is made of polycarbonate, because the strong polycarbonate absorb infrared radiation. The frequency of light is cutting machine used for cutting material, so it is very ineffective when cutting polycarbonate. Polycarbonate is a bad choice. It produces long plumes of ash, floating in the air, optical system, the machine operation. Acrylonitrile - Butadiene - Melting/styrene cyanide ABS on the cutter cutting is bad. It tends to melt instead of evaporation, and have a higher chance of fire and leave to melt the cohesive sediment in vector cutting on the grid. It can't very well carved ( Similarly, easy to melt) 。 ABS plastics will release hydrogen cyanide, this in any concentrations is unsafe. HDPE/plastic bottles on fire to melt it melts. It becomes sticky. It is on fire. Don't use it. Polystyrene foam fire soon it is on fire, burn quickly, melt quickly, only a thin pieces. This is the first cause fire material! ! Polypropylene foam fire like polystyrene, it can catch fire after melting, melt water droplets, continue to burn into droplets of water and the pebbles as hard as rock. Epoxy resin/burning smoke epoxy resin is a kind of aliphatic resin, carbon chain with strong crosslinking. The confusion from the burning of carbon dioxide can't cut it, toxic gases ( Such as cyanide! ) Coating of epoxy resin or epoxy resin casting items shall not be used for cutting machine. ( See the glass fiber) Glass fiber sends out a smell that is a mixture of two kinds of shear of material can not be. Glass ( Etching, without cutting) And epoxy resin ( Smoke) Coating on carbon fiber discharge poisonous gas mixture of two kinds of materials. The thin carbon fiber mat can cut, there are some wear - But not when coating. Any food ( Such as meat, laver, cookie dough) Is not used to cut food, people can produce such as cutting wood smoke and toxic materials such as acrylic smoke. If you want to cut the food, you can consider sponsoring a cutter cutting food, only to maintain required for commercial kitchen clean. Materials to viscose backing to cover lens, lens has a lot of normal circumstances can be stripped of crack items, such as laminated sheet, you can buy two sub-companies named seaport when manufacturers in coated with a layer of strip at the bottom of the glue, will not be able to cut. Cork tiles, for example, two sub-companies named seaport laminate, acrylic tiles and paper stickers. If these materials have the backing, don't use cutting machine cutting. Glue will evaporate, and form a coating on lens, the coating will cover lens, make its become cloud, heating, and then could make the lens rupture. Need to replace the lens.