2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Latest products
Cutting machine daily maintenance tips
by：ZORON Machinery
2021-01-29
1, the cutting machine nozzle check periodically change.
2, cutting machine, drag chain often should clean the chip removal.
3, clear in time discharging car waste garbage.
4, timing, focus lens clean cutting machine cutting head, and check if they are damaged.
5, pay attention to the surrounding environment and personal safety when using gas, especially with supplemental oxygen cutting.
6, and the cutting machine to keep clean and tidy appearance, often clean.
7, clear in time lot filtering online sundry, ensure smooth ventilation tube.
8, monitor checker mechanical brake light switch is normal.
9, cutting nozzle once every 30 minutes to clean, to spray on the metal residue removed.
10, work every day to check before cutting machine of x, y, z axis machine tool can be back to the origin, if there are any problems, check whether the origin switch collision block position deviation.
11, use air rifle clean water cooling machine and the dust on the freeze dryer heat slices, for blowing off dust to ensure the cooling efficiency.
12, check the cooling water temperature, the apparatus in 19 ℃ temperature of 22 ℃ or less or less. The temperature change in 21 ℃ or so. Water inlet pressure between 4 ~ 5 bar.
13, check the freeze drying machine, press the start button indicator is on. If automatic drainer drainage on a regular basis. In the condition of stop and there is no compressed air, evaporation is lower than the environment temperature of pointer thermometer, about 5 - below the environment temperature 15 ℃ is normal. Under the conditions of operation and compressed air flow, pointer of evaporation thermometer is in the green area.
14, often visited stabilizer work status: watch compensation transformer and the regulating transformer temperature rise is normal, with or without overheating, the phenomenon such as coil change color; Carbon brush contact are in good condition; Monitor the input and output voltage is normal; Is there a overload phenomenon, etc. Once found abnormal should be an immediate processing. Can't handle can contact the manufacturer to solve in time, in order to avoid damage to the equipment.
we want more cutting machine price, welcome to inquire, hotline:
2, cutting machine, drag chain often should clean the chip removal.
3, clear in time discharging car waste garbage.
4, timing, focus lens clean cutting machine cutting head, and check if they are damaged.
5, pay attention to the surrounding environment and personal safety when using gas, especially with supplemental oxygen cutting.
6, and the cutting machine to keep clean and tidy appearance, often clean.
7, clear in time lot filtering online sundry, ensure smooth ventilation tube.
8, monitor checker mechanical brake light switch is normal.
9, cutting nozzle once every 30 minutes to clean, to spray on the metal residue removed.
10, work every day to check before cutting machine of x, y, z axis machine tool can be back to the origin, if there are any problems, check whether the origin switch collision block position deviation.
11, use air rifle clean water cooling machine and the dust on the freeze dryer heat slices, for blowing off dust to ensure the cooling efficiency.
12, check the cooling water temperature, the apparatus in 19 ℃ temperature of 22 ℃ or less or less. The temperature change in 21 ℃ or so. Water inlet pressure between 4 ~ 5 bar.
13, check the freeze drying machine, press the start button indicator is on. If automatic drainer drainage on a regular basis. In the condition of stop and there is no compressed air, evaporation is lower than the environment temperature of pointer thermometer, about 5 - below the environment temperature 15 ℃ is normal. Under the conditions of operation and compressed air flow, pointer of evaporation thermometer is in the green area.
14, often visited stabilizer work status: watch compensation transformer and the regulating transformer temperature rise is normal, with or without overheating, the phenomenon such as coil change color; Carbon brush contact are in good condition; Monitor the input and output voltage is normal; Is there a overload phenomenon, etc. Once found abnormal should be an immediate processing. Can't handle can contact the manufacturer to solve in time, in order to avoid damage to the equipment.
we want more cutting machine price, welcome to inquire, hotline:
Custom message
