Cutting machine fault maintenance method

Cutting the chance of failure has a lot of, but, if it is found that after cutting machine fails, we should promptly use reasonable method to cutting machine maintenance. Cutting machine failure phenomenon, however, for different reasons, so, what we need to take the solution is different also.

the following, let small make up to introduce for everybody, what are the maintenance of cutting machine fault phenomenon of method:

a, machine is not running: check whether the cutting machine power switch is open; Check whether the power cord connection good power plug, whether to have loose; Check whether the panel power supply is open.

2, pump does not work: check whether the cutter circulation system is blocked; Check the liquid level of the whole system, ensure the pump whether can receive liquid, check if the pump motor can operate.

3, no or insufficient cooling refrigeration: check if the voltage is too low or too high; Check whether the overmuch quantity of heat transferred to cutting machine cooling liquid, as it will lead to more than refrigeration system cooling capacity.

4, pump suction: see if cutting machine connecting pipe is restricted; If the voltage is too low or the fluid viscosity is too high.

we are in the maintenance of cutting machine, be sure to use the correct method, if maintenance method is not correct, can cause damage to and to instead. We found in cutting machine fault cannot solve, can contact the manufacturer to solve.