Cutting machine have what advantage?

Cutting machine have what advantage? Technology has the following advantages: high accuracy is very good, high speed cutting quality small incision compared with other thermal cutting technology, heat affected zone is very small. Very little heat application, therefore the shrinkage rate of cutting material is very small. Can cut the complex geometric shape, pore, cant part. Use the same cutting tools for cutting and marking can cut a variety of materials and processing cutting tool material, Focusing on the head) There is no contact between, so will not impose any force on the artifact. In a wide range of ( 1 - 100%) Easy and fast control power, can reduce the narrow or narrow the curve of the power. The oxide layer is very thin, with a torch cutting is easy to remove. High pressure in nitrogen gas cutting, cutting can be realized without oxidation. Engineer is like cutting services, because it provides a long list of benefits. Cut the advantage of flexibility, accurate, repeatable, speed, cost effective, high quality, non-contact cutting, versatility, and automation. Flexibility cutting does not need to change for each separate cutting tools. The same Settings fit within the same material thickness cutting many different shapes. In addition, complex cutting will not cause any problems. Compared with other methods of thermal cutting precision, is one of the main advantages cutting precision. Accuracy is + / - 0. 1 mm, there will be opportunities in the case of without any post-processing to achieve high precision. In most cases, such high standards means that does not need to increase the tolerance. Repetitive + / - 0. 5 mm, ensure parts between is almost a copy of each other. Cut much faster than the traditional mechanical cutting way. Especially under the condition of the cutting is more complex. Compared with other thermal cutting way or flame cutting, etc, on the speed is better than they, reaches a certain thickness, which is around 10 mm. But the advantage of specific points in the final analysis is to look at the power of cutting machine.