Cutting machine installation process do you understand

Speak of 'cutter', believe in front of the screen you will surely not strange, is now a very popular type cutting machine, cutting machine, compared with the traditional cutting machine, cutting machine with high efficiency higher advantages, longer operation time, and as type cutting machine is widely used in recent years, greatly promoted the cutting efficiency of cutting operation, and according to the market we can see that in recent years, cutting machine, cutter, sales of products compared with other cutting machine, growth is very big, here with this article, let us together to detailed understanding of the cutting machine using the process. Before using cutting machine, we need to put a piece of iron plate to cut material on the shelf. It is important to note that the feeding rack plate needs a special level, place of iron plate should be parallel, so we can be found according to the cutter trajectory parallelism. Before work, we need to check the usage of cutting machine, if there is a problem, and make sure no problem before start the machine, so as to avoid an accident. Then, before start the machine in normal use, check the walking track, make sure there are no obstacles. If it is a dual cutter is divided into cutting machine and flame cutting machine. We must according to the thickness of the cutting of the iron plate to decide to use what kind of cutting method. Both have their advantages, so we can choose our. Such as open the equipment. Open the system, select the graphic management, find we need cutting graphics, and then set the size of the need to cut and confirm it. If we need to cut the graphics in the system is not available, we need to use drawing software to draw pictures, and then use the nested software to nesting. We can adjust the cutting order when nested. Above the specified function is set up according to our own iron plate size, after the arrangement good graphics, can save them, put our u disk, and then will be read u disk inserted into the system. Everything is in place, press the start button to start on the cutting machine for cutting. About cutting machine use process, do not know you understand? With the widely application of the cutting machine in recent years, we must choose to have years of experience in buying cutting machine manufacturers to buy, and after buying cutting machine to pay more attention to the maintenance of the cutting machine.