Cutting machine processing speed too fast can cause what consequence

Now processing means of processing industry is becoming more and more diversified, with improvement of processing requirements, cutting machine was accepted by people slowly, its optical processing performance, lead humanity to the processing of the new era.


the principle of cutting machine is the use of partial melting of high-energy irradiation the workpiece, to achieve the goal of cutting, cutting section of such a way that the workpieces is smooth, high precision, but relatively and plasma cutting, somewhat less on speed. If the blind increase cutting machine cutting speed can cause what consequences?

　　1. Too fast will cause radiation surface heating time is too short, a can cut, but also sparks.

　　2. Even cutting through the workpiece, can cause the cutting section of rough, decrease the accuracy.

so, at the time of adjust the processing speed, we should according to the actual plate thickness. According to the small make up many years of experience, summed up the following judgment way: a. When the spark to spread by the show that cutting speed. b。 If the spark lean back, the cutting speed too fast. c。 If there is no diffusion spark, and relatively less, shows that cutting speed is too slow.

hope that some of the above summary, which could help beginner friends cutting machine industry, technical problems, if there are other still can at any time consulting us.