2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Latest products
Cutting machine the workpiece cutting through what reason be?
by：ZORON Machinery
2021-01-29
Cutting machine as a kind of metal processing equipment, it has unique cutting edge in the industry of sheet metal cutting, in the industry were given the extremely high hopes.
In practice, however, there are a lot of operators found often have the cutting effect is not ideal, can't even cut the workpiece through conditions occur, companies were very confused, then cutting machine the workpiece cutting through what reason be?
can't cutting machine the workpiece cutting through the reasons are:
in the first place, need to check whether the tube is normal, such as whether to have: aging, deformation, power is too small, and so on. If found that the existence of these problems, to timely replacement or adjust the right tube.
second, check and clean tube light outlet, ensure the export of light to normal. If found to have the lens is damaged, should be timely replacement lenses.
in the end, in the process of the launch of beam, check whether the light path is in the center. Check whether the following phenomena: whether beam through the center of local is obscured. If not beam through the center, is easy to cause the diffraction phenomenon, reduce the power and beam quality.
can't cutting machine the workpiece cutting through solution are:
1, replace the new tube
2, pipe deformation, can be repeatedly rotating tube, rotate the support of a proper Angle.
3, within the scope of the tube can withstand more working current, increase power applications.
4, to decrease the size of light spot: the decrease of the working current of the light spot size than increasing or replace a bull and more effective, suitable for most of the production and processing, and lower cost.
the above content is 'cutting machine the workpiece cutting opaque is the reason why' details, hope to help you, if can't solve the problem, must promptly notify the supplier to find professional after-sales personnel for inspection and maintenance.
can't cutting machine the workpiece cutting through the reasons are:
in the first place, need to check whether the tube is normal, such as whether to have: aging, deformation, power is too small, and so on. If found that the existence of these problems, to timely replacement or adjust the right tube.
second, check and clean tube light outlet, ensure the export of light to normal. If found to have the lens is damaged, should be timely replacement lenses.
in the end, in the process of the launch of beam, check whether the light path is in the center. Check whether the following phenomena: whether beam through the center of local is obscured. If not beam through the center, is easy to cause the diffraction phenomenon, reduce the power and beam quality.
can't cutting machine the workpiece cutting through solution are:
1, replace the new tube
2, pipe deformation, can be repeatedly rotating tube, rotate the support of a proper Angle.
3, within the scope of the tube can withstand more working current, increase power applications.
4, to decrease the size of light spot: the decrease of the working current of the light spot size than increasing or replace a bull and more effective, suitable for most of the production and processing, and lower cost.
the above content is 'cutting machine the workpiece cutting opaque is the reason why' details, hope to help you, if can't solve the problem, must promptly notify the supplier to find professional after-sales personnel for inspection and maintenance.
Custom message
