Cutting machine to protect the lens have the cause of the water mist

Cutting machine in cutting process, auxiliary gas is indispensable! Which we often use the presence of oxygen and nitrogen, of course, the higher the purity of the gas, the better cutting quality. There are many customers want to save costs by air cutting, but the cutting protection lenses are always in the process of water mist, cutting quality is very poor, is this why?

in the first place, ZuoLong machinery to popularize first, the function of auxiliary gas:

1. In order to blow away the residual slag, to achieve good cutting effect.

　　2. Using gas blow away the metal slag protection lens at the same time, avoid the slag stick attached to the lens, influence the cutting quality.

　　3. Can effectively achieve cut surface is bright and clean, without burr and hang the effect of slag, belongs to the essence of the cutting.

　　4. Can react with material, increase the cutting speed, for example, using oxygen can achieve the result of combustion.

so, in order to achieve good cutting effect, high to the requirement of auxiliary gas! Although the air can be used as auxiliary gas, but because of containing water and oil in the air, if not treated, can cause the lens pollution, cutting head is not stable, so that the cutting effect and the quality is not up to standard, etc. So, when using air cutting, the need for cutting machine equipped with a person, it is good to solve the problem. Person can be compressed air forced cooling below the dew point temperature of the requirements, which may contribute to the large amount of water vapor and oil mist condenses into droplets, through the gas-liquid separation, discharge closed by drainage, compressed air drying.