Dongguan Zuolong Machinery Co., Ltd. upholds a spirit to be down-to-earth and fearless in the development. Now we have many honors and certifications. Zuolong Machinery enjoys a superior geographical location with many transportation routes. This facilitates the going out of people and the transportation of goods. Since the establishment, Zuolong Machinery has always been focusing on the R&D and production of cylinder sewing machine . With great production capability, we can provide customers with personalized solutions according to their needs. Zuolong Machinery not only has a great production capability, but also a professional technical and R&D team. We can continue to provide professional processing services. We are also available in customized services based on the picture or sample.

Furniture factory with edge sealing machine pneumatic cutting knife just sent in the material to cut the action is a public problem First, you can see if there is glue around the glue pot at ordinary times,Dew glue, etc,Causes the glue to flow to the edge of the conveyor belt during the glue coating process,After cooling and solidification, through the stroke switch,And drive the stroke switch,Lead to knife cutting Second, it depends on whether the wire of your trip switch is loose,Cause the wire to drop,When the plate passes through, the cutting knife moves in advance.Third, see if your machine has been repaired,The stroke switch is not in the original position,Closer to the direction of the glue pot,Cause the board to cut the belt as soon as it enters the machine,The fourth is to see if it is your circuit problem,

Is there a sewing machine store near Lumu, Suzhou, or does anyone know that a family on Linton Road is said to be First of all, let's check whether the needle is installed correctly,It's better to change a new machine needle.2, if still not,We went on to open the needle,Turn the needle to the lowest position,Look at the rotary shuttle tip from the machine needle 8mm or so.If yes,Raise the machine needle 2.3mm or so,Look at whether the rotary shuttle tip coincides with the machine needle center.At this time, the needle and the tip of the shuttle can not be too tight,0.1 gap.Try, only a little bit, otherwise it will break the line, sometimes such a simple operation is also very effective.4. it also has something to do with the thickness of your sewing.Thick things should be thicker,If the needle is fine, it will jump,If something thin,Thick will also jump.5, because the machine to maintain,Put the teeth on the machine,The places where the shuttle is placed below are all clear,Put some more