Dongguan Zuolong Machinery Co., Ltd. is dedicated to solving your problems and providing you with one-stop and comprehensive solutions. Zuolong Machinery's automatic cutting machine can be applied to different fields. With a focus on production management, Zuolong Machinery keeps introducing advanced production technology to improve product quality. We guarantee that every indicator of the machinery meets both the national and the industry standards. If you have needs to purchase our products in bulk, please contact us for detailed information. The automatic cutting machine series is available in a wide range of types and specifications.

What are the types of sewing machines? Sewing machine according to its use,It can be divided into household sewing machines, industrial sewing machines and service industry sewing machines located between them.Household sewing machine.According to its mechanism and trace form,It can be roughly summarized as JA type, JB type, JG type and JH type.The following figure shows a household sewing machine--JG household electronic multi-function sewing machine.2.Industrial sewing machine.Most of the sewing machines used in the industry belong to general sewing machines,Including sewing machine, chain sewing machine, quilting machine, sewing machine and sewing machine, etc,The use rate of the sewing machine is the highest.In addition,Sewing machines have other categories,Such as: according to the driving mode can be divided into hand, foot and electric sewing machine;Household sewing machines, industrial sewing machines and sewing machines for service industries.1. the household sewing machine is suitable for sewin

Is the pressure sensor used by the computer pattern sewing machine? Computer car Daily fault cancellation method April 11 Question 1: Brother computer flat machine, when cutting the line, the card machine or broken needle (mostly when cutting the rough line) adjusted the parking positionThe electromechanical installation makes the remaining lines of the cut line short and useless.First: Scheme 1: Fixed, knife grinding faster.2: move the knife forward.3: The cut time is set.In general, we do denim lines that are like this;Second: the belt can be tightened a little,Then check if there is any problem with the locator?Third: the positioning of the tangential drive Cam and the tangential handle slide is not allowed.Have you noticed what a line on the needle stick is doing?If you understand it, you will understand it.The horizontal gap between the Cam and the slide rod is 1 MM.(There are three lines on the needle Rod. The second is a shuttle.There is another one Look at the machine!It's boring when I say it.When