2656284142@qq.com
TELL US MORE ABOUT YOUR PROJECT
Contact Sales at Zuolong
Key what cutting machine maintenance
by：ZORON Machinery
2021-01-29
Many operators want to improve the quality of cutting machine of high efficiency and high running, want to achieve this goal, we must start from the basic maintenance, this is not achieved overnight, need long-term persistence, so, maintain focus on what are the cutting machine?
The following is to detailed introduce to you.
1, once a week, vacuum suction off the dust and dirt inside the cutting machine, all electrical cabinets should be protected from dust.
2, check every six months rail straightness and verticality of the machine, found abnormal timely maintenance and debugging. Didn't do this, may be cut out of the effect is not good, the error will increase, affect the cutting quality. This is a top priority, have to do.
3, check the steel belt of the cutting machine, must guarantee the taut. Otherwise in run out of the question, can lead to injuries. Steel with seemingly little things, out of the question is a bit serious.
4, the guide should often clean, remove dust and other sundry, guarantee normal rack cutter always wipe, add lubricating oil, ensure lubricating and no clutter. Guide to regular cleaning and lubricating oil, and the motor is always clean and grease, machine line into can better and more accurate cutting, cutting out the product quality will be improved.
the above is for some maintain focus on the simple introduction of cutting machine, 'Rome is not build in a day', for cutting machine maintenance work must start from the usual spot, it can make cutting machine more lasting for work.
1, once a week, vacuum suction off the dust and dirt inside the cutting machine, all electrical cabinets should be protected from dust.
2, check every six months rail straightness and verticality of the machine, found abnormal timely maintenance and debugging. Didn't do this, may be cut out of the effect is not good, the error will increase, affect the cutting quality. This is a top priority, have to do.
3, check the steel belt of the cutting machine, must guarantee the taut. Otherwise in run out of the question, can lead to injuries. Steel with seemingly little things, out of the question is a bit serious.
4, the guide should often clean, remove dust and other sundry, guarantee normal rack cutter always wipe, add lubricating oil, ensure lubricating and no clutter. Guide to regular cleaning and lubricating oil, and the motor is always clean and grease, machine line into can better and more accurate cutting, cutting out the product quality will be improved.
the above is for some maintain focus on the simple introduction of cutting machine, 'Rome is not build in a day', for cutting machine maintenance work must start from the usual spot, it can make cutting machine more lasting for work.
Custom message
