Metal cutting machine for cutting the copper material processing method

Metal cutting machine for cutting high reflective materials is now a lot of metal cutting machine manufacturers an important problem. High reflection has been metal cutting machine for cutting metal materials difficult materials, including copper, aluminum, gold, etc. , these materials was more common in our daily processing of materials.

in the cutting of high reflective materials is to add a few auxiliary gas, to increase the speed of the cutting. Why cutting high reflective metal materials need to add auxiliary gas? When metal cutting machine for cutting metal copper, adding auxiliary gases and materials in the high temperature in reaction condition, increase the cutting speed, for example, using oxygen can achieve the result of combustion. Nitrogen in for cutting equipment, is to improve an auxiliary gases, the effect of cutting for below 1 mm copper material, use a metal cutting machine is completely can be processed.

when using metal cutting machine, don't worry about whether I can cut through material, should notice is how effective treatment, using nitrogen as auxiliary gases as well. When the metal copper thickness to 2 mm, if only in nitrogen is unable to carry on the processing, then must add oxygen, oxidation, can achieve cutting.

metal cutting machine processing is a skilled job, 'he wants to cut copper materials to achieve better effect, the operator technical requirements are very high, only good technology and good method, processing copper materials to more simple.