Water chiller ZuoLong mechanical action: cutting machine maintenance and maintenance

Cutting machine of the chiller must conduct regular maintenance and maintenance, so as to guarantee the machine running in good condition, if encounter trouble, don't do STH without authorization, should ask professional technology personnel for repair, shall not remove the machine itself. Cutting machine chiller should be paid attention to the daily maintenance of the following aspects:





1. Regular cleaning heat sink, cleaning method is: use the brush will carefully brushed on heat sink, and then use compressed air to blow clean, when it is necessary to water against the special air-conditioning fin cleaning agent for cleaning and washing.

2。 On a regular basis to dust removal (condenser Method is same as above) 。

3。 Regularly check the chiller water level in the tank, if the water level is too low, should be timely to add pure water or deionized water.

4。 Regularly check electrical terminals, and dust removal, After power on) 。

5。 Regularly check whether the joint leakage in water system, pipeline is aging, if there is leakage phenomenon should be timely replacement of related components.

6. Regularly check water quality in water chiller water tank, if the water quality variation of cooling water transparency, turbidity, drop, to put off the bad all cooling water in time, change a new cooling water.

7。 Regular cleaning of the impurity on the filter core, if the filter is damaged, should be timely replacement, replacement of filter manufacturer must standards filter.