We pay attention to the cutting? Suggest you look at the 9 o 'clock

Cutting work has been applied in various industries, to guarantee the cutting efficiency, be about to choose a qualified cutting machine, cutting machine as a cutting machine is very popular in recent years, because of its excellent quality and significant advantages are well known, but also greatly improves the cutting efficiency of cutting machine, so we pay attention to when using cutting? Let's learn about the below. We pay attention to the cutting? 1, adjust by cutting steel plate, as far as possible keep parallel with orbit. 2, according to the thickness and material, choosing appropriate cutting nozzle. The cutting nozzle and plate vertically. 3, according to the different thickness and material, and to set the machine in the cutting speed and preheating time, set the preheating oxygen, reasonable cutting oxygen pressure. 4, after firing, and may not contact cutting area. Operators should be adopted as far as possible little splash of cutting method, protect the cutting nozzle. 5, check the flame heating, as well as cutting oxygen jet, if discover to there is damage, cutting nozzle should be replaced in a timely manner, and clean up. Clean up the cutting nozzle used special tools to clear. 6, tempering occur in the process of cutting, should cut off power supply in time, stop and turn off the gas valve, tempering valve plates if do burn, should stop to use, such as manufacturer or have years of experience in personnel change. 7, cutting machine, the operation should always pay attention to the equipment running status, if found to have abnormal situation, should press tight stop switch, out of the work in time, it is forbidden to boot from the scene. 8, the operator should pay attention to, after cutting a workpiece, cutting torch should be promoted back, run to the next stage, and then to cut. 9, the operator should according to the provisions of a given cutting elements choice cutting speed, not allowed to simply in order to improve the work efficiency and increase equipment load, to deal with the relationship between the equipment service life and efficiency and environmental protection. We pay attention to the cutting? About this problem, the above is the full answer to the question, hoping to be helpful to the screen in front of you, in the development of recent years, cutting machine, gradually become the mainstream of the current cutting machine is suitable for various industries, promote the growth of the cutting machine product sales, if you want to know the price cutting machine or cutting machine purchase way, you can directly contact our customer service staff.