When cutting machine punching hole blasting is what reason

Many cutting machine users when cutting over 6 mm plate, it is easy to appear when punching hole blasting phenomenon, caused by cutting samples are incomplete or servo following problems such as unstable. What reason is caused? The list below for everyone to look at the time.





1. Lower oxygen pressure

the oxygen in the process of cutting is combustion, drilling pressure is too high, plank will instantly break, caused the explosion. Reduce the pressure of blowing, slow breakdown when punching sheet, won't cause explosion.

2。 Using air cutting

cutting machine using air cutting can improve the blasting hole phenomenon, but the cutting speed is reduced. Of course you can also use an inert gas such as nitrogen, but gas costs will be high.

3。 Adjust the focal length

the focal length adjustment to solve blasting hole is more complex, need us in the cutting sample, step by step debugging, let focus focus on the surface of cutting boards. If cut thick plate, will make cutting and beautiful degree is reduced.

4。 Upgrade equipment

punching and cutting cutting machine of gas and air pressure respectively, can effectively reduce the blasting hole.