What are the risks and harmful factors of mechanical equipment? The risk factors of general mechanical equipment, the risk of mechanical equipment is mainly the movement part of the equipmentSuch as transmission mechanism and tool,Moving workpieces and chips.If the equipment is defective, the protective device fails or the operation is improper,It may cause personal injury or death at any time.Our uncoiling machine, cutting machine, longitudinal cutting machine, automatic welding, coiling machine, working machine, air compressor, air pressure pump, hydraulic press, wire wrapping machine, spraying machine, mixer, Crane, cutting machine, bench drill and so on all have risk factors.(1) the danger of the transmission device, the mechanical transmission is divided into gear transmission, chain transmission and belt transmission.Since the parts do not meet the requirements,If the mechanical design is unreasonable,The transmission part and the prominent rotating part are exposed, without protection, etc,Or

Dongguan Zuolong Machinery Co., Ltd. upholds a spirit to be down-to-earth and fearless in the development. Now we have many honors and certifications. Zuolong Machinery enjoys developed telecommunication and traffic convenience. The geographic location is superior and the natural conditions are good. Zuolong Machinery is dedicated to solving your problems and providing you with one-stop and comprehensive solutions. Zuolong Machinery has a scientific management mode and great production capability. We carry out standard and scale production, so as to ensure that we could meet customers' needs for large-quantity orders of quality machinery. We can provide OEM/ODM services.

How to turn thick aluminum wire and aluminum block into aluminum powder The method is to heat and squeeze the rest of the metal pigment and powder coating (resin, etc.) through the screw extruder.Although metal pigments and powder coatings can be fully mixed,However, the orientation of metal pigments in high viscosity melt is insufficient.In addition,In the next crushing process,The flaky structure of the pigment will inevitably be destroyed.The metal effect is gray when the metal powder produced by this method is constructed.So,This method is only used for the production of hammer powder.The method is to mix the metal pigment dry powder into the crushed powder coating with a mechanical mixer.The advantage of dry mixing is that metal pigments and powder coatings are not very intense when mixed,Thus preventing the deformation of sheet metal pigments,Metal effects are thus not affected.In addition,Loose pigment/resin mixture is also very beneficial to the orientation of metal pigments,Improve flash effect