Winter low temperature using cutter matters needing attention

Use cutting machine for attention of many winter low temperature, under the condition of the temperature is low, sometimes even can't use, below are some winter low temperature using cutter matters needing attention. Could lead to a cutting machine, Water cooling machine) The situation of the freeze. 1. The temperature lower than 0 ℃, no heating facilities, stop for a long time. 2. Temperature is lower than 0 ℃, heating facilities, but due to the holidays ( Such as the Spring Festival) Stop heating and electricity, stop for a long time. 3. Water-cooled machine placed in outdoor. ( Including cold water machine) The damage ice as we all know, ice is less than the density of water. Once device inside the core component of the cooling water flowing through the ice, the volume will expand, may cause serious damage to pipeline, which seriously affect the core parts of safe, caused heavy losses. Note 1. Ensure that the environment temperature is higher than 0 ℃. 2. Retainer and water cooler in an open position all the time, and let the water flow in an attempt to prevent freezing 3. To implement and water cooler water tank and the water in the pipe as far as possible put off. 4. After adding klein antifreeze winter, please pay attention to the cooling water switch back to normal, switch back to the original parameters. Change water, before the first tank and pipeline of antifreeze is rinsed clean, normal change water. At the same time of change water filter replacement to ions. To add water, must first before starting the pump exhaust, otherwise it will damage the pump.