Don't want to implement internal condensation? Strict controls of cutter switch machine order

In the process of cutting machine running, if the strict control cutting machine boot sequence, reduces the risk of condensation, reduce love machine fault!





(1) check machine operating range for items affect the safe operation of the machine tool

(2) boot the total power switch and the selection of control power switch

3. Open the regulator, check the running state of the voltage regulator is normal

4. Open the power switch, to implement their own air conditioning or internal probe is running more than 30 minutes

(5) is to open the power switch to run for 20 minutes when open air compressor, check whether the running state of the air compressor normal

6 open air pneumatic control valve and open person, check whether the running state of the person who is normal, check whether the air pressure is normal

7) according to the need to open the cutting auxiliary gas control valve, check whether the cutting auxiliary gas pressure is normal

today open the machine power switch, press power on button to start the machine tool control system, after waiting for control system to start the normal machine back to the origin of the

pet-name ruby editor to open the power switch to run more than 30 minutes after opening the cold water machine running, check whether the chiller running state is normal

attending cold water machine such as high and low actual temperature reaches set temperature range of + / - 1 ℃ warm water after high pressure on the checker running state is normal