Flame cutting machine cutting speed will impact?

The use of flame cutting machine cutting accuracy is relatively high, can quickly cut, have certain advantages, in the later in the use of cutting workpiece quality is affected by many factors, including cutting speed, cutting speed will affect the cutting quality of the workpiece, so what is the effect of specific? Let's take a look at together. Thick steel plate cutting speed with stainless steel plate on the carbon dioxide of ignition. In the manufacture of the specific need according to the commonly used technical parameters of the nozzle, the steam body type and cleanliness, the thickness of the steel plate materials and adjust the cutting speed. Cutting speed immediate harm to cut off the whole process of reliability and quality of cut section.
if you want to improve the cutting speed increase productivity, reducing the speed of cutting, improve the quality of the cutting section, that is not an option. Will only reduce the quality of the cutting section. Fast cutting speed will be on the cutting section produce the quality defects such as depression and depression, serious can lead to cut off the end.
cutting speed is too slow, top the wound will melt, lower limb will become circular arc, cut off the lower part of the section will be clean, spiral groove sag. Look carefully slag feature, from the wound can be adjusted to the appropriate cutting speed.
in the whole process of all normal flame cutting, cutting oxygen flow relative vertical cutting torch slightly off to the back of the Angle of view, the offset is called back drag in consistent. Speed is too low, there is no reverse drag momentum, the product of workpiece under fire cut off at the mouth of the bouquet to cut off the azimuth migration.
speed up the movement of the torch flame cutting machine, offset bouquets of fire to the opposite direction, when fire bouquet in and cutting off the oxygen flow parallel to the surface, so the cutting speed is normal. Speed is too high, fire bouquet obvious backward migration. Above is the flame cutting machine cutting speed will bring some impact, cutting too fast or too slow will affect the quality of the workpiece itself, thus to strictly to control its speed during cutting, can not affect the cutting quality of the workpiece. In addition to pay attention to the quality section, to ensure smooth section.