Flying light ZuoLong mechanical explanation: cutting machine how to adjust?

A lot of times we've seen of the cutting machine is a straight line, but does not rule out some cases need to change the transmission direction to achieve cutting effect. How to adjust the cutter's flight path? Large-format thick steel plate cutting, welding technology, to solve the high power, large, multi degree of freedom and flight path and the key technologies of cutting system.





to gradually adjust the beam position where far from pipe, adjust the two tags until mark centre. Repeat until it can be taken to the designated location. The apparatus for use not only should have high output power; More important is time and space characteristics of the light beam, therefore generally transverse CO2 can not adapt to the requirements of the cutting. Mainly used in industrial production realistic change of average power method, the specific method is to change the pulse width; Change the pulse frequency; Change the pulse width and frequency at the same time.

to ensure that the first shot from generator can accurate hit no. 1 in the middle of the mirror, the debug in front of the mirror 2 when you need to add a piece of cardboard to test out the position of the light spot, in order to avoid radiation hurt people. General hole size and thickness, average diameter of blasting perforation thickness of the half, so the blasting perforation aperture is bigger, thicker plate and not

round, should not be used on machining precision to demand higher parts, can only be used for waste. So choose a trustworthy brand cutting machine manufacturer is very important, ZuoLong machinery focused on cutting!

in general generator are fixed, so the transmission direction is fixed, but in order to demand, we want people to take some measures to change the direction of transmission, let 'fly' for a while. The compound stamping machine is to use the punch first before rushed out of a hole, and then with a start from the small hole cutting. Usually change the

lose direction is through the mirror and optical fiber, such as generator, reflector, this kind of situation is called cutting machine flight path.

the cutting process of working principle is: in the process of machining, material after continuous exposure to form a pit in the center, and by working with bunch of coaxial flow quickly remove the molten material to form a hole. Cutting is an advanced manufacturing technology, to improve manufacturing technology and equipment innovation, when designing the need to add the

working parts cutting section have higher roughness requirement, must pay attention to the problem, usually need at cutting program do manual adjustments to the starting position of the beam, the manual for the control of puncture point. Practice, we need to constantly accumulate experience, through practice and summary, improve the cutting quality and cutting efficiency, realize the

light cutting machine use value.