How to adjust the welding machine cavity?

1. Patrol benchmark light: red semiconductor is the benchmark of the light path, must first to ensure its accuracy. Cutting machine in the form of light is concentrated into a high density of beam, the beam to the work surface, produce enough heat, melt materials, coupled with the high pressure gas with beam coaxial direct removal of molten metal, so as to achieve the purpose of cutting, it shows that cutting with machine tool machining the distinction that having essence.

2。 Adjust the output mirror ( The output medium ( Material) and decisive Diaphragm) Location: adjust the output mirror, should be equipped with YAG rods condensing cavity, so as to avoid because of the light path of YAG rods refraction error affect the accuracy of adjustment. Cutting machine in the form of light is concentrated into a high density of beam, the beam to the work surface, produce enough heat, melt materials, coupled with the high pressure gas with beam coaxial direct removal of molten metal, so as to achieve the purpose of cutting, it shows that cutting with machine tool machining the distinction that having essence. The output medium ( Material) and decisive The precise location of the diaphragm should be a red light is located in the center position and the red light fully reflected back to red to perforation, otherwise should be carefully adjusted by diaphragm frame knob.

3。 Patrol YAG rod installation location: use transparent tape taped to the ends of the YAG rod set, observe whether red spot is in the middle of the two rod bushing location, if any deviation, by adjusting the position of the condensing cavity should be amended. Cutting machine in the form of light is concentrated into a high density of beam, the beam to the work surface, produce enough heat, melt materials, coupled with the high pressure gas with beam coaxial direct removal of molten metal, so as to achieve the purpose of cutting, it shows that cutting with machine tool machining the distinction that having essence. Cutting machine cutting is the release of the beam to the workpiece surface energy to make workpiece melting and evaporation, to achieve the purpose of cutting and carving, has high precision, fast cutting, cutting pattern is not limited to restrictions, automatic typesetting save materials, incision smooth, low processing cost etc, will gradually improve or replace the traditional metal cutting processing equipment.

4, inspect the location of the brake light: artificial rotary reflection lens bracket, push the brake light to light blocking position, observe whether the red light in the center of the lens, the reflected light is located in the center of the beam end device on the absorption of the cone, such as the location is not correct to adapt, should pay special attention to carefully inspect the brake light reflection lens is clean, contaminated the lens in use will soon burst. Cutting machine cutting is the release of the beam to the workpiece surface energy to make workpiece melting and evaporation, to achieve the purpose of cutting and carving, has high precision, fast cutting, cutting pattern is not limited to restrictions, automatic typesetting save materials, incision smooth, low processing cost etc, will gradually improve or replace the traditional metal cutting processing equipment. Now finished parts of the welded machine adjustment work.





we want more welding machine price, welcome to inquire, hotline: