In the process of daily use, routine maintenance measures are essential, in particular the phenomenon of condensation is summer, in order to prevent the occurrence of this phenomenon, how should do?
First of all we know about the first two prevent:
1.
Prevent fiber fracture, implement system by fiber optic connection between pump sources are used and head, should ensure that users in the use of, or in transit optical fiber bending diameter greater than 300 mm.
Bending seriously will lead to the broken fiber and implement system cannot work normally.
2.
To prevent dust pollution, the power and head of the optical fiber access to optical fiber connection, that must be installed with the system to provide protection cover, to prevent external dust pollution within the optical element.
Optical fiber under the not connected to the power supply and head of state, must be installed with the system to provide protection cover, to prevent the fiber end surface pollution.
Not installed protective cover will make the internal pollution of optical components and optical fiber end face, will cause the entire system can not work normally, and loss of warranty.
here, about avoiding condensation:
first of all should ban systems work in high humidity environment, the customer shall ensure that the environment humidity is less than 60%.
When the crystal temperature and environmental temperature difference is too big, could lead to crystal condensation, condensation will cause the system power down or damaged.
So when the environment temperature is greater than the water tank set temperature, it is strictly prohibited to systems don't work in a single open water cooling machine and head of state.
When switched on, first open the cold water machine, refrigerator temperature display below 30 ℃, start the power supply and the current slow adjustment to about 10 a;
For refrigerator temperature display at operating temperature, and then slowly to adjust current to working current.
During shutdown, first the current slow down to about 10 a and stop the power supply output, shut off the power, then closed water cooling machine as soon as possible.
If don't work in the current place, may be appropriately raised refrigerator refrigeration temperature must be within the prescribed conditions, using the system equipment.
2656284142@qq.com
