How to prevent organ freezes in the low temperature environment problems

Winter season is coming soon, many clients are in regional environmental temperature is below zero, low temperature freezing and cold water systems of with security threats, and at the same time due to causes such as freezing and cold water machine system damage consequence is very serious. In order to fully make efforts to prevent and safeguard, please be sure to consider, to prevent from unnecessary economic losses. If you want to avoid is water-cooled machine freezes in the low temperature environment, ZuoLong machinery prompt customers may consider the following measures:





1. Prevent freezing the recommended method, is to make the water cooling machine and the machine has been in the environment temperature is above zero degrees Celsius.

2。 If the above conditions can't meet, please keep the device and water-cooled machine was on. If the inside of the pipe has been flowing water, can prevent freezing effect. In this case, of course, if the water cooling machine long downtime because of malfunction or a power outage, ice also exists certain risk.

3。 If the above methods all can't do that, you can add my company recommended antifreeze - — Chariant company AntifrogenN antifreeze. The adding proportion is 3:7 ( 3 is the antifreeze, 7 is water) , after adding antifreeze can resist - 20 ℃ without ice.

4。 At night and during the holiday, can't do that, if the above three and water-cooled machine can be the water in the tank and pipeline emptying as far as possible, please follow the instructions below.

4。 1 unit for water-cooled machine need drainage area; Water tank, pipeline, water pump, pump head, filters, ion cans ( Optional)

4。 2 cistern drainage method: as the chart, open the drainage valve, tank bottom water tank of water, water-cooled machine can be tilted a certain Angle when necessary, is outfall is low.

4。 3 drainage pipeline: use compressed air from the low temperature water, high temperature water respectively for 1 minute, by the water tank drain drainage.

4。 4 open the tank cover observe whether there is any residual water in the tank, if any, tilted slightly cold water machine making water or water with dry towel blot.

4。 5 drainage pump pump: at the bottom of the each pump pump head on the water has a screw, when water pilot time to stop or transport, will open on the water head screw pump is put the water in the water pump, use compressed air to blow, then drain screw.

6. Filters, ion tank drainage: open the filter, a drain valve at the bottom of the tank to ion or organic glass shell can eliminate the residual water.

7。 After the need to pay attention to

7. Or need to add water after 1 if the end of the holiday, before the boot must be carried out on the water pump drainage, otherwise it will damage the pump.

7。 2 to add antifreeze water-cooled machine, please pay attention to switch back to normal after the cooling water in winter. Please change water before the whole tank and pipeline in antifreeze rinse completely, and then to change water properly, change who also want to change to ion tube.

please technology related to the above content, debugging, users, operators and terminal customer knowledge, such as an unidentified place, please contact ZuoLong mechanical after-sale service phone or our regional business personnel and after-sale commissioner.

we want more cutting machine price, welcome to inquire, hotline: