Plate processing frequently encountered problems in the cutter

Cutting machine is of that is emitted from the device by the light path system, focus on high power density beam. Beam to the surface of workpiece, the workpiece, melting point or boiling point at the same time and the beam coaxial high pressure gas will melt or gasification metal blown away. With the movement of the relative position between the beam and workpiece, make the material form the kerf width, thus achieve the goal of cutting. Carbon steel plate hole problems

in thick plate processing time accounts for a large proportion of perforation, manufacturers have developed fast perforation technology, a more representative is high-energy perforation ( Blast hole) , the advantage of this method is fast, 1 second, t16mm, for example - The following is the same) , defect is not only affect the shape of a small processing, punch the injection of huge energy make plate temperature will affect the whole cutting process. And with a small power pulse is perforated, time is long, 12 seconds) To cause a decline in the efficiency of cutting and the rising cost of unit. Cut surface quality problems

processing often met in thick plate cutting in the cross section, the cutting is not only the finished product quality has been questioned, also will appear with burnt and serious viscous slag, so that reflect the high price is not the value of the processor is different from other cutting methods. The whole plate processing stability problems

in the whole of domestic steel plate processing, often can appear the negative aspects of a local processing. This phenomenon is very random, sometimes even under the condition of the machine in good condition.