The advantages of cutting process of cutting

1, oxidation melting cutting

melt cutting generally use inert gases, if replaced with oxygen or other reactive gas, material under the irradiation of beam was lit, and the chemical reaction of oxygen violent and produce another source of heat, called oxidation melting cutting.

2, melt cutting

when the incident beam power density exceeds a certain value, beam point material internal open mom evaporation, forming holes. Once the holes to form, which will serve as a bold absorb all of the incident beam energy. Hole is surrounded by a wall of molten metal, and then, and beam coaxial auxiliary air holes around the molten material. With workpiece moving, the hole by the synchronous transverse cutting direction to form a cut seam. Beam to continue along the seam at the forefront of irradiation, continuous or pulse melting materials from being blown away from the seam.

3, fracture control cutting

for easy heat damage of brittle materials, high speed, controlled by beam heating cutting, called control fracture cutting. The cutting process is the main content: beam heating brittle material is small area, causing the area of thermal gradient and severe mechanical deformation, cracks leads to the formation of a material. Just keep balanced heating gradient, may guide beam crack in any direction.

4, vaporization cutting

under the high power density beam heating, the material surface temperature to the boiling point temperature speed is so fast, enough to avoid melting caused by heat conduction, so part of the material vaporized into steam, part of the material as the ejecta from the bottom of the kerf width auxiliary gas flow blown away.

we want more cutting machine price, welcome to inquire, hotline: