The metal cutting machine guide rail cleaning and processing

The cleanness of guide rail ( Clean suggest a half month and operation should be performed after closing machine) As a core component, guide rail and linear axis in the guide and support role. In order to ensure the higher processing precision of machine, guide rail and linear shaft must have a good accuracy and dynamic stability. Corrosion in the process of equipment operation, a lot of dust and smoke when handling processing parts, manufacturing, and the cumulative linear axis on the surface of guide rail and in the long run, will affect the machining accuracy, equipment, formation of corrosion on the surface of guide rail and linear axis, shorten the working life of the equipment. In order to make the machine work normally and stability, guarantee the quality of products, this is very important, keep the guide rail and straight axis every day.





note: dry cotton cloth and lubricating oil - - - - - - - Used for cleaning guide.

preparation: cutting machine guide rail can be divided into linear guide rail and the roller guide rail, among them, the linear guiderail along the X direction, but the roller guide rail used on YM series Y direction.

clean linear guide: moving head to the pole on the right side ( Or on the left) Linear guideway, found as shown in the picture above; With dry cloth to wipe, until it becomes polishing, and add some lubricating oil. Have a haircut to the right and left a few times, in order to fully and evenly distributed lubricating oil.

clean guide: moving beam on both sides of the end cover of the medial and open to find guide rail; Use dry cloth to wipe it on both sides of guide rail contact roller components and mobile beam clean up the rest of the place.