These prepare your cutting machine can safely for the winter

Cold air strikes, announced the winter has come, in February 11, after the national most areas are obviously felt the cold, the cold weather will cause certain effect for cutting machine equipment, winter be anti-freezing cutting machine is a cliche, mainly from the following aspects of risk aversion.


a, temperature

( 1) Winter equipment working environment is bad, need to keep the temperature of the working environment in above zero, the necessary time for heating. As local won't power outages, the night is not closed water cooling machine, at the same time to save energy, low temperature and normal temperature water temperature adjustment to 5 ~ 10 ℃, ensure circulation state and temperature of cooling water is not below freezing.

　　( 2) Although the effects of temperature on cutting machine is not particularly big, but with many users will add butter to screw, the winter is sure to forget to clean up, cause every time on sports. Like the winter is very cold in the north, workshop temperature is low, although added oil machine, or moves up. At this time we will guarantee the workshop temperature to the temperature of the gas standard.

2, cooling water

( 1) If the device is under the condition of continuous work, cold water machine of water is in a state of flow for a long time, usually is not frozen.

　　( 2) Summer high temperature, the temperature of the cooling water should be in within the prescribed scope of the equipment, or above a certain temperature will cause alarm, have a certain influence on equipment. And winter if the water temperature was not well maintained, the harm of tube is bigger, will generate heat in the process of equipment operation, the effect of the cooling water is also very important, and should not be neglected; And winter if the device does not run, remember to clean tube of water treatment, in order to avoid again when using frozen condition, affect the use. Cooling water is the condition of normal operation of the spindle motor, temperature too much discomfort or impurities will affect the motor, users need to guarantee the normal work of the cooling water clean and the water pump.

note: if the light equipment in long-term do not use or in the case of power failure, be sure to drain the water from the cold water tank.

3, antifreeze,

in the cooling system in proportion to add antifreeze, try to reduce unnecessary losses.

we want more cutting machine price, welcome to inquire, hotline: