Cutting machine is a precision equipment, each component is essential, so we must take every parts maintenance good, so cutting machine can exert its advantages, help us to create more wealth.
Here we emphasize the pressure regulating valve installation and maintenance, how to install and maintain good to play to the role of the pressure regulating valve?
first, before the pressure regulating valve is installed to remember to clean the pipe blowing dust, grease and other particles, at the same time, be sure to prevent pieces of sealing material mixed with it;
second, moisture in the air of the heavier cause condensation water, condensed water stay inside the valve, easy to cause the pressure reducing valve bad conditions, so will handle below, to facilitate control.
Direction of import and export shall not be installed backwards, or reducing valve long leak, loss of pressure regulating function;
Two alternating high and low pressure inlet valve do loop, please use the one-way valve, in order to prevent the reverse flow;
Suction side pressure pipeline with condensed water, oil, dirt and other would be cause often drainage hole or blockage in a throttling orifice, make the effect of the regulating valve is affected, thus reducing valve should be installed in the front of the filter, to prevent dust, oil, etc. ;
At the same time should be used in a certain temperature range, beyond the temperature loss, should avoid direct sunlight, damage;
Should set aside the appropriate space all round, for regulating the operation and maintenance;
Regulating the operation after the completion of the pressure reducing valve adjusting button should be locked.
step by step, according to the above steps, the pressure regulating valve can perform its function, more to play a better role auxiliary cutting machine, improve the cutting efficiency.
2656284142@qq.com
